LED Film Screen
XLC Film Series
Film-thin transparent screen from P4–8 to P20
The XLC Film Series is a flexible LED film that bonds to glass with a clear adhesive. Six models from P4–8 to P20 use 1,500 mm modules, a 3.5 kg/m² build and 55–85% transparency, removing the need for a separate cabinet frame.
- Pixel pitch
- P4–8
- Transparency
- 65%
- Brightness
- 5,000 nits
- IP rating
- IP43
How the format works
LED pixels and driver lines are laminated onto a transparent film that bonds to the glass. Because the film follows the glass surface, there is no separate cabinet depth and no frame around the display area.
Selection notes
- Existing glass that cannot carry a cabinet frame
- Interior partitions, shop windows and hotel glazing with a clean frame line
- Flat glass in good condition, with power and signal available at the edge
Where this format fits
The series is chosen for the way the space is used and viewed, not only for the size of the opening.
Six film models
Pitches from P4–8 to P20 cover close interior glazing through large glazed openings.
No visible frame
The film follows the glass surface, so the screen reads as part of the glazing rather than an added box.
3.5 kg/m²
The film build keeps weight low enough for existing glass and light mullion systems.
Cut to the opening
Panels are produced to the glass dimensions, including irregular openings where the layout allows.
Model specifications
The model table shows the range for this series. Site conditions determine the final cabinet, brightness and control configuration.
| Model | Pixel pitch | Transparency | Brightness | Cabinet size | Module size | Weight | IP rating | Refresh rate | Power | Control |
|---|---|---|---|---|---|---|---|---|---|---|
| XLC Film P4 | P4–8 | 65% | 5,000 nits | Film panel, project size | 1,500 × 256 mm | 3.5 kg/m² | IP43 | ≥3,840 Hz | ≤300 / ≤800 W/m² | Static scan |
| XLC Film P5 | P5–10 | 68% | 5,000 nits | Film panel, project size | 1,500 × 320 mm | 3.5 kg/m² | IP43 | ≥3,840 Hz | ≤300 / ≤800 W/m² | Static scan |
| XLC Film P6 | P6.5 | 55% | 5,000 nits | Film panel, project size | 1,500 × 208 mm | 3.5 kg/m² | IP43 | ≥3,840 Hz | ≤300 / ≤800 W/m² | Static scan |
| XLC Film P8 | P8 | 60% | 5,000 nits | Film panel, project size | 1,500 × 256 mm | 3.5 kg/m² | IP43 | ≥3,840 Hz | ≤300 / ≤800 W/m² | Static scan |
| XLC Film P10 | P10 | 70% | 5,000 nits | Film panel, project size | 1,500 × 320 mm | 3.5 kg/m² | IP43 | ≥3,840 Hz | ≤300 / ≤800 W/m² | Static scan |
| XLC Film P20 | P20 | 85% | 4,500 nits | Film panel, project size | 1,500 × 320 mm | 3.5 kg/m² | IP43 | ≥3,840 Hz | ≤200 / ≤800 W/m² | Static scan |
Typical values shown for series comparison. Final specifications are confirmed against the project configuration and current datasheet.
Verification
What you can check before the order
A transparent screen is an optical, structural and electronic decision at the same time. The points below show what can be reviewed with the sample, the drawings and the batch record rather than taken on trust.
Request the verification packSample measurement
A sample module can be measured against the agreed pitch, transparency and brightness before the batch is released.
Batch test record
Aging and outgoing inspection records are matched to the serial numbers that ship with the project.
Interface drawings
Fixing, power and signal routes are issued for approval before production starts.
Locked datasheet
The final datasheet follows the confirmed bill of materials. Catalogue values stay typical until then.
Catalogue values are typical. The project datasheet, test record and drawings are the controlling documents for the confirmed configuration.
Applications
All markets
Retail & Storefront
Window and in-store displays that add motion at street level while keeping the shop interior visible.
Exhibition & Showroom
Near-invisible displays for showrooms, launches and exhibition stands where the product should lead.
Architecture & Glass Facade
Facade media that follows the building line and keeps the glazing readable behind the screen.
Installation and service
Mounting and service are agreed with the site, not assumed from the product drawing.
- Glass surface cleaned and prepared before bonding
- Power and signal routed through a concealed edge connection
- Flatness and edge clearance checked before commissioning
Maintenance
Film sections can be replaced individually. Drive electronics are held in a remote or edge-mounted enclosure.
Project package
What ships with the screen
The quotation is built around the site, so the package is confirmed before production. A typical project includes:
- LED cabinets, modules and a matched spare set
- Power, data and control cabling for the agreed layout
- Receiving cards with the controller configuration
- Aging test record and outgoing inspection checklist
- Installation drawings, wiring schedule and service guide
Typical package shown for planning. Final scope, spares and documentation are confirmed in the quotation.
Technical documents
Documents are issued against the confirmed configuration. No download files are published before the model and control package are fixed.
Related series
Specify the XLC Film Series for your project
Share the site conditions and target date. We will confirm the model, cabinet layout and control package.
Mon to Fri, 09:00 to 18:00 (GMT+8)